Abstract
Analysis showed that the servo system should have less than 0.4 um dynamic focus error. This accuracy could be guaranteed with a standard high bandwidth second order loop with lead lag compensation and a low frequency integrator. In the electronic design attention has been paid to avoid signal saturation during seeks due to optical crosstalk between the focus and the tracking channel. This crosstalk is discussed in a companion paper.(2) A measurement of the focus loop transfer function can be found in figure 1.
© 1984 Optical Society of America
PDF ArticleMore Like This
Tetsuo Semba, Allen K. Bates, and Alan A. Fennema
OTuA.4 Symposium on Optical Memory (ODS) 1996
Scott Hamilton, Tony Lavender, and Larry Dillard
FCB4 Optical Data Storage (ODS) 1984
M. de Haan and Di Chen
WCA5 Optical Data Storage (ODS) 1984